1/2" Industrial Air Angle Impact Wrench-244 Nm, 7,000 rpm
●Angle head is the most effective tool to tighten up the object in a narrow space where it’s difficult to reach, such as agricultural machinery, chassis, and so on.
●Genius Design on Forward / Reverse Switch
-One hand switch over forwarded and reversed.
-Two stages of the torque setting in forward enable to control the torque properly without over-tightening.
-Powerful reversing torque continuously; the operators have maximum torque to remove the fasteners.
●♦Precise Machine Bevel Gear
-Transmission smooth.
-Noise level reduced.
-Extended lifespan.
●New & Improved Rear Exhaust through the Muffler
-Rear exhaust created to discharge air away from the work environment.
-Optional air hose to lessen the sound of exhaust is available.
●Jumbo Hammer
-Powerful torque & Instant high torque output.
♦ Ideal for using into the tightest and narrowest of workspaces.
ST-5235 / ST-5245 / Industrial Super Duty Composite Pneumatic Angle Impact Wrench
|
Model No. |
Square Drive (inch) |
Free Speed (r.p.m) |
Max. Torque |
Air Inlet (PT) |
Air Hose (ID) |
Air Consumption |
Overall Length |
Net Weight |
Packing Pcs/Ctn/G.W./Cuft (kgs) |
||||
|
ft-lb |
N.m |
cfm |
l/min |
inch |
mm |
lbs |
Kgs |
||||||
|
ST-5235 |
3/8 |
7,000 |
160 |
217 |
1/4" |
3/8" |
14 |
400 |
13.4 |
341 |
3.97 |
1.80 |
10/Ctn/21/1.13' |
|
ST-5245 |
1/2 |
7,000 |
180 |
244 |
1/4" |
3/8" |
14 |
400 |
13.4 |
341 |
3.97 |
1.80 |
10/Ctn/21/1.13' |
